2018 Gehl DL12-40 GEN:2 Telescopic Handler

Call for Price


Availability
Brochure
Year
2018
Manufacturer
Gehl
Model
DL12-40 GEN:2 Telescopic Handler

Overview

Description

Key Features
  • Rated Lift Capacity (kg): 12,000 lbs. (5444)
  • Maximum Lift Height (m): 40' 4" (12.3)
  • Gross Power (kW): 115 hp (86)
  • Maximum Forward Reach (m): 26' 4" (8.0)
Capacities
  • Lift Capacity: 12,000 lb.
  • Maximum Lift Height: 40 ft. 4 in.
  • Capacity at Maximum Lift Height: 10,000 lb.
  • Maximum Forward Reach: 26 ft. 4 in.
  • Capacity at Maximum Forward Reach: 2,000 lb.
  • Maximum Reach Below Grade: 1 ft. 4 in.
Loader Performance
  • Breakout Force: 14,000 lbf
  • Maximum Dump Height: 39 ft. 0 in.
  • Maximum Forward Reach at 45° Dump Angle: 11 ft. 10 in.
  • Dump Angle at Maximum Dump Height: 24 deg.
  • Maximum Loadover Height: 40 ft. 3 in.
  • Maximum Dump Height at 45° Dump Angle: 30 ft. 9 in.
  • Maximum Forward Reach at Maximum Dump Height: 1 ft. 2 in.
  • Rollback at Ground Level: 30 deg.
  • Total Degrees of Bucket Rotation: 132 deg.
Engine
  • Manufacturer: Cummins
  • Model: 3.8L QSF Tier IV
  • Power: 120 hp
  • Aspiration: Turbocharged
  • Rated Speed: 2,500 rpm
Components
  • Transmission: 4-Speed Power Shift
  • Maximum Travel Speed: 22.8 mph
  • Selective Steering: 4-Wheel 2-Wheel Crab
  • Brakes: Oil-Immersed, Disc-type
  • Parking Brake: Spring-Applied, Hydraulic Release
Hydraulics
  • Pump Type: Open-Center, Dual-Section
  • Total Capacity: 43 gpm
  • Main Relief Pressure: 3,000 psi
  • Auxiliary Relief Pressure: 2,500 psi
  • Hydraulic Reservoir Capacity: 45 gal.
General Specifications
  • Approximate Weight: 25,300 lb.
  • Length - Less Forks: 19 ft. 4 in.
  • Width: 8 ft. 3 in.
  • Ground Clearance: 16 in.
  • Wheelbase: 10 ft. 8 in.
  • Turning Radius: 12 ft. 2 in.
  • Overall Height: 7 ft. 11 in.
  • Frame Leveling - Left/Right: 10 deg. /10 deg.
  • Fuel Capacity: 30 gal.
  • Recommended Tire Type: 14.00 x 24 G2 12-ply
Performance
  • The DL12-40 GEN;2 Telescopic Handler is a tool to increase jobsite productivity, develop new business and improve your return-on-investment.
  • 10-degree frame tilt in both directions.
  • Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated.
  • Double universal joints for tight turn radius without applying stress on the axle.
  • Two-wheel, four-wheel, crab steering standard.
  • Standard centrifugal pre-cleaner and two-stage air cleaner.
  • Standard pneumatic tires.
  • Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty.
  • ROPS and FOPS certified operator's compartment.
Operator's Cabin
  • Comfort comes standard on the DL12-40 GEN:2 Telescopic Handler, boasting 57 cubic feet of interior space.
  • Lockable, two-piece cab door for security, communication and cross-ventilation.
  • Choice of Dual-Function or Tri-Function pilot-operated joysticks that allow operators precise movement of heavy loads
  • Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more.
  • Choice of canopy or cab with heating and defrosting systems standard (air-conditioning optional).
  • Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue.
Handling
  • Three steering modes - 4-wheel, 2-wheel and crab - enhance maneuverability and are easily changed by the flip of a switch.
  • Industry loading job site maneuverability with a 12' 2" turning radius.
Remote Boom Control
  • The Remote Boom Control option allows operators to control boom and engine functions from outside the cab.
  • Personnel Work Platform System allows the use of ANSI/ITSDF B56.6-compliant personnel work platforms for safety and efficiency.
  • Remote Boom Control can raise/lower and extend/retract the boom, as well as start/stop the engine from the work platform or outside the cab.
Engine Features
  • The DL12-40 GEN:2 Telescopic Handlers provides the power to get work done effectively and efficiently.
  • Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair.
Hydraulics Features
  • The DL12-40 GEN:2 Telescopic Handler has the hydraulic power to get the job done.
  • 43 gpm (162.8)
  • Open-Center, Dual-Section
  • 3,000 psi (207)
  • 45 gal. (170)
  • 2,500 psi (172)
Attachments
  • There is a tool for every job, and the DL12-40 GEN:2 can power them all. The DL units feature three attachment options: Dynattach®, Dynacarrier, and Dynacarrier with hydraulic locking.
  • Carriages - Masonry, framing and standard carriages available in different widths.
  • Rotating Carriage - 48" (1219 mm) and 66" (1676 mm) wide.
  • Fork Shift - 48" (1219 mm) wide.
  • Swing Carriage - 90° and 180° swing.
  • Log and Pipe Grapple.
  • Jib Boom - 5' (1.5 m) with winch and 60' (18.3 m) cable.
  • Truss Boom - 12' (3.6 m) and 15' (4.5 m) with optional winch.
Serviceability
  • Side-mounted engine improves serviceability, allowing three-sided service access through a large, hinged hood.
  • Exterior boom hose routings for easy access.
  • Transmission and hydraulics easily accessed through large hinged panel.
  • Easy access to hydraulic oil and transmission reservoirs.
  • Hydraulic main control valve in back door.
  • Rifled bushings in key areas

Specs

Engine

Engine Type
3.8L QSF Tier IV
Engine Manufacturer
Cummins
Horsepower
120 hp
Rated RPM
2,500 rpm
Aspiration
Turbocharged
Fuel Capacity
30 gal.

General

SAE Rated Operating Capacity
12,000 lb.
Max Ground Speed
22.8 mph
Tire Size
14.00 x 24 G2 12-ply
Length
19 ft. 4 in.
Width
8 ft. 3 in.
Height
7 ft. 11 in.
Weight
25,300 lb.
Wheelbase
10 ft. 8 in.

Promotions








Related Products