Parking Brake: Spring-Applied, Hydraulic Release (SAHR) on Front Axle
Axle Manufacturer: Dana
Pump Type: Gear
Total Capacity: 20 gpm
System Pressure: 3350 psi
Hydraulic Reservoir Capacity: 18 gal.
Approximate Weight: 10,000 lb.
Length: 12 ft. 4 in.
Width: 5 ft. 11 in.
Ground Clearance: 14 in.
Wheelbase: 7 ft. 6 in.
Turning Radius: 11 ft. 0 in.
Overall Height: 6 ft. 4 in.
Frame Leveling: N/A
Fuel Capacity: 17 gal.
12.00 x 16.5 Bias/10 PR
12.00 x 16.5 Solid Rubber
12.00 x 16.5 Bias/10 PR Foam-Filled
The RS5-19 GEN:3 is built to work hard.
Compact size 5' 11" wide & 6' 4" tall
Total weight of 10,000 lbs
With a ground clearance of 14"
Two section telescopic boom has full hydraulic power for all lift and telescopic functions
Hydraulic self-leveling lift action automatically keeps the load level as the boom is raised.
Inboard wet-disc service brakes
Limited slip differential is located on front axle.
Highly visible boom level indicator is located on the outer boom and an easy-to-read frame level gauge is located in the cab
The operator's cab in the RS5-19 GEN:3 Telescopic Handler is anything but compact. A modern, ergonomic design maximizes comfort.
High-back seat with right-side adjustable armrest; suspension seat optional.
Locking storage compartment under seat.
Full 360° visibility.
Ergonomic design features all gauges, indicator lights and switches on the right-side dash panel
ROPS/FOPS canopy standard; ROPS/FOPS cab with heater or ROPS/FOPS cab with heater & A/C optional
To enhance maneuverability, the RS5-19 Telescopic Handler has three steering modes. An operator can change between 2-wheel, 4-wheel and crab-type steering by flipping a switch in the operator's station.
The RS5-19 GEN:3 Telescopic Handler has the power to get work done effectively and efficiently.
Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for repair.
Rexroth 2-speed hydrostatic transmission.
Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces.
The model RS5-19 GEN:3 makes no exceptions when it comes to hydraulic performance.
20 gpm (83)
3,350 psi (231)
18 gal. (68)
There is a tool for every job, and the RS5-19 GEN:3 can power them all. Dynattach® Quick-Attach system allows quick attachment changes with unsurpassed ease.